PMP Water Trap Kit

With our water trap, every air pump we sell can safely use water in the cylinder, mimicking the effects of a hydro pump.

The water trap is designed to prevent water from getting into your pump. 

The water trap KIT comes with a 16-inch tube.  
If you have 1 tube, simply cut the tube and stick the ends on each side of the trap (see pictures).
If you have 2 tubes, there's no need to cut. 

Water will now catch in the reservoir instead of traveling into your vacuum, preventing damage. 

Instructions:

DO NOT GET YOUR PUMP WET. 
DO NOT FILL THE WATER TRAP WITH WATER. 
Please keep the cylinder upright when using water. 

1. Fill the cylinder up to 1-3 inches of water depending on how long you are.
2. Allow for just enough air to be at the top when inserting your member and begin to pump up.
3. Once you pump up be mindful not to fill the water trap to the top, preventing spillage and water getting into your pump.
4. Once complete please check for any abnormalities in the tube. Try to shake out any potential water from the silicone tubes, water trap, and Auto/Hand gauge pump.

The Auto Pump is NOT water-proof, and the hand gauge can get rusty if wet. 
Report to us when troubleshooting if water has entered your Auto pump or hand gauge.