Got everything in speedy time, good quality products
Penis Pump Replacement Cylinder
Discreet & global • Free shipping available
Peak Male Physique
En existencias
Use this calculator to determine your correct pump cylinder width.
Room for 10 to 15% expansion is recommended. Do not exceed over 30% of your current size.
General consensus is to measure your thickest point.
ATTENTION *** FOR MEN WITH WIDE BASES: Use your widest base girth.
If you are trying to change shape or would like to focus higher on the shaft, measure your mid-shaft instead, while ensuring your base will still fit. And if you are relatively more oval-shaped or flat, or curved, you might need to go up a size to make sure it fits.
Use this calculator to target your proper fatigue levels.
Length:
Fatigue Target (out of device): 2-3% longer.
Strain Target (in device): 4-6% longer.
Girth:
Expansion Target: 4-8% thicker.
* More is not better. Reaching for the max does not mean a better session.
This calculator converts between inches and centimeters. Enter a value in inches or centimeters, and the corresponding value will automatically populate in the other field.
This calculator converts between kilopascals (kPa) and inches of mercury (inHg). Enter a value in either field, and the corresponding value will automatically populate in the other field.
No se pudo cargar la disponibilidad de retiro
Actualmente contamos con los tamaños comunes.
Tamaños máximos por cilindro:
** ¡Deje espacio para la expansión!
1,75 Circunferencia erecta hasta 5,5
2.0 Circunferencia erecta hasta 6.25
2.125 Circunferencia erecta hasta 6.66
2,25 hasta 7
Recomendaciones de tamaño:
Pruebe nuestra calculadora de tallas .
ATENCIÓN *** PARA HOMBRES CON BASES ANCHAS: Utilice la cincha de base más ancha.
Se recomienda dejar espacio para una expansión del 10 al 15%.
Entonces, multiplica tu circunferencia actual por 1,10 o 1,15 para obtener un cilindro que permita la expansión. (ej; 5 x 1,10 = 5,5)
Entonces, una circunferencia de 5 pulgadas multiplicada por 1,10 es 5,5 y por 1,15 es 5,75, por lo que se recomendaría que este ejemplar obtenga el 2,0, ya que permite espacio para el crecimiento y ganancias de bombeo inmediatas.
Recomendamos no superar el 30% de su tamaño actual con la circunferencia interna del cilindro.
Mientras trabajamos para encontrar un tamaño más pequeño, otras empresas DEBERÍAN tener opciones para hombres con una circunferencia menor a 4.0 que coincida con nuestras recomendaciones.
El consenso general es medir desde los puntos más gruesos, pero para los hombres con bases excepcionalmente anchas que desean concentrarse más arriba en el eje, mida la mitad del eje en lugar del punto más grande.
Adults 18+ only. Peak Male Physique is not liable for any outcomes resulting from product use. The customer assumes full responsibility. Any suggestions are optional and not a substitute for personal responsibility or medical advice. Our products are not intended to diagnose, treat, cure, or prevent any medical condition.

✓ Free Shipping & No Duties to US, CAN, UK, EU
✓ Worldwide Shipping
✓ Discreet Packaging
✓ Next Business Day Shipping
✓ 14-Day Returns
✓ Free Return Shipping
✓ No Restocking Fees
✓ Easy Exchanges
Overall rating: 4.8 / 5 from 180 reviews.
Got everything in speedy time, good quality products
Richard 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Thanks Richard.
👍🏽💪🏽🎤
Edgar 5/5 Verified
It was surprisingly well fitting for my first pump.
S 5/5 Verified
Great Customer service. The original product arrived damaged and PMP quickly sent a replacement item. I will definitely be purchasing more items from this company.
Timmy 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Thanks so much for the review, Timmy. Glad we could help.
Needed to upgrade and very pleased!
Russell 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Happy to hear it, Russell. Good luck on your journey.
I did get the electric penis pump from you but I charge it comes on but that’s all it does please send me instructions on using and if that works I will be good but if not I will need how to get a replacement pump
Daniel 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Daniel, Each Auto Pump comes with instructions. We will send the operation manual over. You powered it on correctly, but then click the power button once for pumping. Click again to stop pumping. The 2nd button is the Air Releasing button, tap incrementally to release pressure. Hold to release all pressure. Then the Smart Button is the 3rd button.
Have not used it as of yet
Matthew 3/5 Verified
I outgrew 2” cylinder. Time for the 2.125. Making great progress. Works great.
Scott 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Love to hear it.
Great product!
Douglas 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Thanks. Cheers on your PE journey.
I originally purchased a 2 inch cylinder thatwas too small for me due to a measuring error on my part.. After let PMP know I ordered the correct size and it was sent very quickly. The cylinder works very well. Thank ypu
Grant 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Thanks for letting us help.
Sizing was perfect with this sleeve.
Terry 5/5 Verified
🚀
Edgar 5/5 Verified
Everything I bought from PMP was awesome. I broke the the first pump cylinder before I even got a chance to use it and the guys at PMP helped me out with a discount on a replacement. Thanks
Frix 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Glad we were able to help you out and you are enjoying the products!
I like the sturdiness, but air leaks out of the bottom. I can’t seem to get the kind of seal I need to not to have to keep pumping during my session. I also really like the measurements on the outside. It’s possible if I had a smaller tube I would not experience the air leakage, but I needed a tube that had a little room to grow in. A smaller tube would have had my pumped penis take up the entire space. I wish there was a tighter lip or something at the bottom to restrict the opening more. Update: I was encouraged to solve this leakage issue by ordering a sleeve for the bottom to narrow the opening. Hoping this solves my issue. Note: I am currently waiting for a sleeve to see if this corrects the issue.
Ray 3/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: It sounds like you'd benefit from our "Pump Sleeve." These are useful to get a seal on a slightly larger than expected cylinder, if you have not shaved for a while or if your scrotum is getting pulled in too much, etc. Thanks for the review, Ray.
Works great
David 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Thank you.
It works great
John 5/5 Verified
Literally saved my life thank yu guys
Sean 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: We love you too, Sean. We love you too.
The first pumping cylinder failed to produce a reading on the automatic gauge. I then ordered a manual gauge with the same result: the needle failed to move. I then ordered a larger cylinder, hoping that would activate the gauge, but this was also unsuccessful. I use rough visual estimates and comfort level to determine the limits of pressure. I have attempted to follow instructions regarding the seal and connection for creating negative pressure without functioning gauges.
Joseph 2/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Hi Joseph, If you're getting vacuum pressure and the pump isn't leaking or slowly losing pressure, then it sounds like your gauge is broken. Maybe it happened in shipping. We can send you a new one right away, if needed. We emailed you a couple times recently but haven't heard back. Shoot us an email and we'll work it out.
Everything was great thank you
Jean-philippe 5/5 Verified
I've been using a 2.125 cyl for some time. when I pump the first 4.5 to 5 inches is very thigh to the side. I was thinking that with a smaller cyl the last 1.75 to 2 inches of my D would have a better chance of enlarging. Rick
Richard 5/5 Verified
Thanks you for the prompt replacement of the leaking cylinder. Great customer service. Much appreciated.
Bernard 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Aw, we love you man.
Best decision ever to size up!
Al 5/5 Verified
Great size upgrade for me. My last one is 2.00, just like my last pump it’s great. Thank you!
Owen 5/5 Verified
Everything worked out great! Thanks for the prompt delivery!
Michael 5/5 Verified
I’ve just started using it I’ve also bought the 1.75 to also use
Nelson 4/5 Verified
Great product at a great price. The flat wide base is helpful. Has inches and cm on side. The blue tint on top is a nice touch. With free shipping and being almost half the price of other well marketed replacement cylinders I’m very happy with the product. Will be using peak male physique for any other replacement cylinders, tubing, etc in the future.
Sean 5/5 Verified
Much appreciated, thank you!
Jesse 5/5 Verified
Ngl. I was ready to bomb the review because my cylinder failed in the first month. But I reached out to PMP. Explained everything to them. And turns out that cylinder was defective because so they made it right and shipped out a replacement, free of charge and shipping, and they added discount code for any other item. Which they shipped with my cylinder so I wouldn’t have to pay shipping cost at all. Oh. And the cylinder itself is awesome, btw. I can’t speak for all the products at PMP. But for the ones I purchased( manual pump, cylinder, vacuum cup, & cylinder sleeve) I definitely recommend them. I’ve purchased these elsewhere and paid less and got what I paid for.
Warren 5/5 Verified
Cylinder had a leak somewhere at one of the end welds. I used epoxy to fix it and it works as intended now.
Bernard 2/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Hello, We see the replacement cylinder has been delivered to you. We hope your experience has rectified your bad experience with us and you would consider updating your review! As always if you have any further questions or concerns, then please feel free to reach out any time.
The first cylinder too small(1.75). This one much better(2.125). May be a little big so expect to buy the 2.00 in the near future. Possibly get an extender at the same time. Thank you for the great service.
Lee 5/5 Verified
All good
Graeme 5/5 Verified
The tube is accommodating and appears to be well made. I believe it will last a very long time and am satisfied with my purchase.
Vernon 5/5 Verified
Assisted with getting a new tube. Thank you.
Ryan 5/5 Verified
Great experience, thank you for the fast replacement of different size.
Filip 5/5 Verified
Everything looks and works as advertised!
Shasta 5/5 Verified
All good Thank you
Sergio 5/5 Verified
Well made, good quality product!
Ashan 5/5 Verified
Penis Pump Replacement Cylinder
Store owner replied: Thanks for the review!
Great product loving it so far definitely recommend it.
Moises 5/5 Verified
Great quality and got here quick
Saul 5/5 Verified
Even though I had to purchase another tube due to the base leaking air to eventually cracking, I still think the product is amazing. Don't know if the base is a weak point or if it got damaged due to use or me taking it on trips but I always try to be careful with my things. I will be more cautious this time around.
Joshua 5/5 Verified
Be the first to know about new collections and exclusive offers.