Dobierz rozmiar cylindra pompki
Zmierz obwód penisa we wzwodzie w najszerszym miejscu, także u nasady, jeśli jest szersza.
Zalecana średnica cylindra
Zalecany rozmiar zostanie wybrany poniżej, jeśli jest dostępny. Zachowaj wybraną długość, jeśli ten rozmiar średnicy jest oferowany. Gdy jest dostępna, preferowana jest długość 9 cali. Zbyt szeroki cylinder może pogorszyć dopasowanie i szczelność.
Ilość
Nie można załadować gotowości do odbioru
DARMOWA WYSYŁKA od 20 USD do USA, Kanady, Wielkiej Brytanii i UE
Bez ceł i opłat importowych dla Wielkiej Brytanii, UE i Kanady
Wysyłka na cały świat
Bezpłatne zwroty
Dyskretne opakowanie
Ręczny zestaw pompki próżniowej
Kompletny zestaw z przezroczystym cylindrem akrylowym w wybranym rozmiarze, ręczną pompką z manometrem, silikonowym wężykiem 16 cali (40,6 cm) i separatorem wody.
Mierz obwód w erekcji w najszerszym miejscu. Zostaw orientacyjnie 10–15% przestrzeni na przejściowe zwiększenie objętości. Wybierz odpowiedni wariant przy użyciu kalkulatora rozmiaru PMP.
Cylinder
Maksymalny obwód w erekcji
9 × 1,75 cala
5,5 cala (14,0 cm)
9 × 2,0 cala
6,25 cala (15,9 cm)
9 × 2,125 cala
6,66 cala (16,9 cm)
12 × 2,25 cala
7,0 cala (17,8 cm)
Przy szerokiej nasadzie użyj jej największego obwodu. Poniżej 4 cali (10,2 cm) odpowiedniejszy może być mniejszy cylinder.
Pompki próżniowe są używane m.in. w rutynach związanych z jakością erekcji i przejściowym zwiększeniem objętości. Reakcje organizmu są indywidualne; trwały wzrost nie jest gwarantowany.
Bezpieczny początek
Sprawdź połączenia, zwiększaj podciśnienie stopniowo i kontroluj manometr. Przerwij przy bólu, drętwieniu, siniakach lub wyraźnej zmianie koloru skóry. Unikaj długich sesji z wysokim podciśnieniem.
Wyłącznie dla osób dorosłych od 18. roku życia. Peak Male Physique nie ponosi odpowiedzialności za skutki używania produktów. Klient przyjmuje pełną odpowiedzialność. Wszystkie wskazówki i sugestie są dobrowolne i nie zastępują osobistej odpowiedzialności ani porady medycznej. Nasze produkty nie są przeznaczone do diagnozowania, leczenia, wyleczenia ani zapobiegania chorobom.
To be called a pump “kit” it should come with a pump sleeve just increase the cost and include one. Yes I should I have just bought one but I didn’t realize that by just simply using this device without a pump sleeve without high pressures or high duration would cause a severe injury.
Also this should come with a basic safety manual.
If I had known it would have been this easy to incur an injury like this I 100% would have never bought it. I used it for only 2 weeks.
Considering that I just incurred this injury due to a lack of a pump sleeve in which I have already wasted countless hours of time stressing about and trying to mitigate you would think they would at least give me an option for deal on a new pump sleeve or throw one in. Considering im likely going to have spend upwards of $1000 on doctors appointments. Who knows what else. Nope instead I was met with a flippant response. I really wish I could just return the entire order the two other items I bought are unopened.
I mean let’s say someone injures themselves to the point they can never do PE again using your products would you give them a return or refund? This really adds insult to injury.
Store owner replied:
We’re sorry to hear about your experience and that you’re dealing with an injury. We take customer safety seriously, and we understand that this has been a frustrating situation.
However, we want to clarify a few important points. The pump sleeve is an optional accessory designed to provide additional comfort and help create a seal; it is not a required component of the kit. We understand that you would have preferred it to be included, but it is sold separately and is not represented as part of the standard kit.
Throughout our email correspondence, we explained that our support team can assist with product-related questions but cannot provide medical advice or assess or treat injuries. We recommended consulting a qualified medical professional, which remains the appropriate course of action for any injury or medical concern.
We understand your frustration, but we also need to be clear about the limits of what customer support can responsibly offer. We cannot make medical determinations about the cause or severity of an injury, nor can we promise that an optional accessory would have prevented or addressed one.
We take customer feedback seriously and are always open to reviewing how we communicate product use, accessories, and safety information. At the same time, we believe it is important to distinguish between what is included with a product, what is offered as an optional accessory, and the medical guidance our support team is qualified to provide.
We wish you the best in your recovery.
This pump does not work. It takes two hands to get it to do anything. What are the steps to get a replacement?
Store owner replied:
We emailed to troubleshoot and we can get you a replacement if needed. Here's some tips in the meantime:
Try to figure out where the leak is coming from: the top or the bottom of the cylinder, or the pump handle.
If it’s leaking from the bottom:
You might feel tiny air bubbles or a tickling sensation on your skin. Try trimming your pubic hair. Use lube on the base. Adjust the angle slightly up or down on your pelvic area until you find the sweet spot. (It can take a few tries to find the best fit.)
If it’s leaking from the top:
Make sure the valve on top of the cylinder is tightened, but don’t overtighten it. If the valve still leaks, you can wrap the threads with a bit of plumber’s tape to improve the seal - that’s worked for some customers.
Check the pump handle and hose:
Remove the hose, plug one end, and blow into the other end to see if the hose leaks. Press the unattached tip of the pump handle to your finger. Pump very slowly and lightly to check the pressure.
Store owner replied:
Try out troubleshooting tips to figure out where the leak is coming from: the top or the bottom of the cylinder, or the pump handle.
If it’s leaking from the bottom:
You might feel tiny air bubbles or a tickling sensation on your skin.
Try trimming your pubic hair.
Use lube on the base.
Adjust the angle slightly up or down on your pelvic area until you find the sweet spot. (It can take a few tries to find the best fit.)
If it’s leaking from the top:
Make sure the valve on top of the cylinder is tightened, but don’t overtighten it.
If the valve still leaks, you can wrap the threads with a bit of plumber’s tape to improve the seal - that’s worked for some customers.
Check the pump handle and hose:
Remove the hose, plug one end, and blow into the other end to see if the hose leaks. Press the unattached tip of the pump handle to your finger. Pump very slowly and lightly to check the pressure.
I got this as a way of keeping everything healthy (not for size, which I doubt beyond a temp boost). So far it's great. I bought a different brand that was a waste of time. This one works. My only complaint is that it didn't come with any instructions.
Great product very well built and clean. The extra rubber seal helps a lot keeping everything in place and you nuts from entering the tube which can be extremely uncomfortable. Works as described
Truly love the quality of this pump. It's not only obvious in the materials but also in the suction as well. I definitely can feel the difference between this and my old one. Looking forward to the benefits to come.
Store owner replied:
Hi Matt, we emailed to help troubleshoot but never heard back. We can also send a replacement free of charge if needed. Hope to hear from you soon.
Worked for like a week and now loses suction immediately. I messaged customer service, will see what they do about it. Way to quick for it to break, I am using it properly and babying it.
The attachment on the top of the vacuum tube leaks. To hold a steady pressure requires repeated pumping. I first thought the pump had a slow leak, or the seal against the base and my skin was the problem but it wasn’t.
Store owner replied:
Hey Robert,
We offer replacement both male and female connector pieces for the cylinder (female) and the hose (male). We emailed to let you know we could replace that for you and troubleshoot further. The valve might just need tightening, or some guys have luck with plumber's tape on the valve threads if needed.
The pump works well and is excellent. I hope to achieve the desired results and I will buy another, wider tube…. I highly recommend it; it's a fantastic pump 😊
