Apex Extender WITH Vacuum Kit

The Apex Extender

The Apex Extender by Massive Novelties has been a community favorite for years. This version of the apex was built to maximize comfort while maintaining unparalleled build quality in the industry.

The frame is a single piece of 6mm thick electro-coated High-carbon Steel, making the Apex the strongest extender on the market, Ensuring your safety. The electroplating keeps the steel rust-free.

Sizing

While the device itself is over 13 inches tall, it will fit the vast majority of men (and potentially small horses.) This oversized extender is intended for years of use but also ensures maximum device compatibility.

The Apex works for men from 2.0in to 10.5in or 5.08 cm to 26.67cm

This size range is with a vacuum base attachment system, compression hangers like the male Hanger maximum size is going to be closer to 8-9 inches long

The maximum girth the Apex can accommodate is 7.5 inches base girth.

Unmatched Comfort

After many renditions of the base, Massive Novelties decided on its horseshoe design. The horseshoe allows for the maximum surface area on the base, alleviating pressure, making the Apex one of the most comfortable devices on the market; for those who need a bit more cushion, a 6mm thick cushion is available for purchase, quite useful for the very lean.

The horseshoe design makes taking on and off the device a breeze. There is no need to come out of the attachment mechanism; the device just slides off and on.

The groove on the front matches your contours, minimizing pinching of loose skin.

Apex is adjustable 180 degrees, allowing you to extend in practically every position. With its hinge system, it stays put at the angle you set it to. Removing the need to use unsafe tensions to hold the device at the proper angle. 

The Apex can generate up to 20 lb. of tension with its custom-made springs. These springs were specifically designed for the job, ensuring accuracy for years to come, unlike competitors who use off-the-shelf springs that will degrade over time, leading to inaccuracies.

The housing for the tension mechanism has etched tension markers, ensuring ease of readability well into the future.

Compatibility

The apex is designed to work with practically every PE device on the market that uses a hook, leading to unmatched compatibility. The horseshoe base allows for large devices to be worn in tandem with the APEX, the 360 degree adjustable hook allows for adjusting to fit most latching mechanisms on the market. The hook also allows for easy adjustments for advanced techniques like bundled extending

Apex is confirmed to fit:

PMP Vacuum Hanger Cups
MaleHanger ( older versions might need a strap adjustment)
MOS Cups
TotalMan Cups
Generic Vacuum Hanger cups
Wrecking ball and Jack Hammer by Fenrir
LG hanger
StealthForMen Vacuum Hanger
P-hanger

This list is non-exhaustive; practically speaking, any device with a normal hooking mechanism will work. Proprietary systems like the Phallosan Forte and PeniMaster are not officially supported.

Vacuum Kit

PLEASE HANDLE SLEEVES WITH CARE, 

Leave in cool dry area 

Do not leave attached to cups 

Apply baby powder or silicone longevity powder 

Proper care for sleeves will ensure the life of your sleeves from one day to 6 months or more! Understand that this material is light. 

Sizing Guide: 

Measurements are determined by erect glans girth. Must be at or close to for best pick.

MODEST - 33 mm

3.1" - 4.1"
7.6 cm - 10.4 cm

MEDIUM - 38 mm

4.2" - 5.1"
10.4 cm - 13 cm

LARGE - 42 mm

5.2" - 6.0"
13.5 cm - 15.2 cm

MONSTER - 45 mm

6.1" - 6.75"
15.3 cm - 17.2 cm

Kit comes with:

• Apex Extender by Massive Novelties
• Vacuum Cup
• 2 Sleeves, one sleeve 3 inches long and one sleeve that is 5.75 long
• Vacuum Handle
• Carabiner

HOW TO PUT ON